Operating instructions

Hook thread counter on and off
N7.3
The function of the hook thread counter is either switched on or off.
–
Select the relevant line with the ñ and ò keys.
–
Press the OK-key.
–
Select the parameter On or Off by using the arrow keys ñ and ò .The
main menu will indicate no parameter with the hook thread counter
switched off.
4.5 Soft start on /off
–
Select the “Soft start” in the main menu with the arrow keys ñ and ò.
–
Press the OK-key.
–
Select the parameter On or Off by using the arrow keys ñ and ò .
–
Press the OK-key.
Note !
The number and sewing speed of the soft start stitch can be
preset in the technician level.
If a main sewing speed is less than the soft start sewing speed,
the soft s tart will be automatically switched off.
4.6 Sequences
4.6.1 General
Single buttonhole mode
One buttonhole can be selected from a total of 50 preprogrammed
buttonhole programs. Memory locations 51 and 52 can be used for free
sewing contours.
This buttonhole will be sewn until another buttonhole is selected.
Sequence mode
The seamstress will be in a position to sew a sequence of different
buttonholes without having to push a key on the control panel.
·
20 different sequences can be created and saved in the memory.
·
Each sequence can contain up to 20 buttonholes.
·
In principle all buttonholes can be s elected in one sequence.
Note
A plausibility check of the individual buttonhole parameters is first
made when the sequence is selected in the sewing mode!
22