Operating instructions

Table Of Contents

4.2 Changing parameter values

4.2.1 Numerical values

Numerical values can be altered in the follow ing w ays:

–

With the arrow keys ñ and ò choose the line in which the value

needs to be changed.

–

Press the OK key.

The curser blinks under the position of the value to be changed.

–

With the arrow keys ï and ð change between the values.

–

With the arrow keys ñ and ò increase or decrease the chosen

value.

With parameters that can not be arbitrarily changed, by pressing of

the arrow keys ñ and ò another possible parameter is shown on

the display.

–

Press the OK key.

The set value will be accepted.

–

If the set value is not to be accepted, press the ESC-key.

The original value or setting will be reestablished.

4.2.1 Parameter selection

With some parameters several choices are available.

The pa rameter can be changed in the follow ing w ay:

–

With the arrow keys ñ and ò choose the line with the parameter to

is be changed.

–

Press the OK key.

–

With the arrow keys ñ and ò change between the possibilities. The

respective parameter is shown.

–

Press the OK key. The set value or parameter will be accepted.

–

If the set value or parameter is not to be accepted, press the

ESC-key.

The original value or parameter setting will be reestablished.