Operating instructions

Table Of Contents

3.9 Regulating the sewing basket lifting height

CAUTION !

Ensure that,

–

a distance o f at least 1 mm lies between top thread cutter and the

knife bottom edge of the lifted basket

–

the knife point does not protrude out of the basket bottom.

Factory setting for the basket lifting height is 12 mm. Adjust the basket

lifting height in the following way:

–

Switch off the machine.

–

Loosen screws 1 and 2.

–

Increase the basket lifting height: Turn set screw 3 clockwise.

Reduce basket lifting height: Turn set screw 3 anti-clockwise.

–

Tighten screws 1 and 2.

–

Switch on the machine and check s ettings.

3.9 Regulating the sewing basket pressure

–

The sewing basket pressure is adjusted using screw 4.

Increase pressure: Turn screw 4 clockwise.

Reduce pressure: Turn screw 4 anti-clockwise.