Operating instructions

11.3 Alignment of the scissors block

Standard 1:

The scissors block should be at the same level as the lug of the cage

presser bar.

Standard 2:

–

The scissors block should be aligned in parallel position to the

sewing head edge. (3 and 4 mm throw width )

–

For 6 mm equipment turned by 1° counter-clockwise.

Setting :

–

Unscrew the regulating screw for the sewing basket pressure.

–

Loosen the threaded pins 1 and adjust the scissors block according

to the instructions.

ATTENTION!

By turning the scissors block the position of the cage as to the needle

hole is changed.

Correct the cage position according to chapter 9.3, if required.