Operating instructions

9. Sewing basket

9.1 Setting of the cloth presser block (lifting stroke)

Standard:

The maximum stroke of 12 mm must not be exceeded. When

exceeding the stroke the needle thread scissors would be pressed

against the knife.

Setting:

–

Lower the sewing basket.

–

Loosen the screws 1.

–

Loosen the counternut 2.

–

Turn the threaded pin 3 according to the instructions.

Increase the stroke - turn the threaded pin in clockwise direction

Reduce the stroke - turn the threaded pin counter-clockwise.

–

Tighten counternut 2 and screws 1 again.

–

Lift and check the cage.

9.2 Lifting/Lowering speed of the sewing basket

–

Turn the throttling screw 4 for adjusting the lifting speed.

–

Turn the throttling screw 5 for adjusting the lowering speed.

higher speed = Turn the throttling screw counter-clockwise

low er speed = Turn the throttling screw clockwise