Operating instructions

4.4.2 Submenu DAC III
No. Parameter name Symbol Description
T3.3.1 D ate/Time
Submenu for setting the time and
the date ð see chapter 4.2 (T2.2) of
this instruction manual
T3.3.2 Temperature
Display of the current temperature
inside the DAC III in °C
T3.3.3 Intermediate circuit
voltage
Display of the current intermediate
circuit voltage in V
4.4.3 Submenu Reset
No. Parameter name Symbol Description
T3.4.1 Buttonholes
Selection ® Confirmation
Reset to default the buttonhole
geometry.
T3.4.2 C omplete
Selection ® Confirmation
Reset to default the buttonhole
geometry and the machine
parameters.
Attention!
All changes performed previously
will be lost. No recovery function is
available.
4.4.3 Submenu Memo dongle
The dongle can be inserted into the socket x110 (test interface) of the
control DAC III or pulled off again when the automate is running.
No. Parameter name Symbol Description
T3.5.1 Dongle content
It is automatically recognized
whether a data or machine software
dongle has been plugged in. The
corresponding menu is displayed.
T3.5.2 Loading
The submenu Loading is displayed.
Buttonhole, sequence or machine
data can be loaded from the dongle.
T3.5.3 Saving
The submenu Saving is displayed.
Buttonhole, sequence or machine
data can be stored onto the dongle.
T3.5.4 Formatting
Format the data dongle
15
3