Operating instructions

3. Calling up the technician mode and entering the code
In order to get into the technician mode a code has to be entered. For
this purpose please proceed as follows:
–
Press the F key in the sewing mode.
A window for entering the code appears.
–
Enter the technician code 25483.
Confirm with the OK key.
Note
If a wrong code has been entered, the automate returns to
the sewing mode.
4. Main menu of the technician mode
No. Parameter name Symbol Description
T1 Machine
Selection of the submenu for the machine
configuration
T2 User configuration
Selection of the submenu for the configuration
of the control elements
T3 Service
Selection of the submenu for test functions
4.1 Submenu Machine configuration
No. Parameter name Symbol Range Description
T1.1 Parameter -
Selection of the submenu for
parameter setting
T1.2 Soft start -
Selection of the submenu for soft
start setting
T1.3 Equipment -
Selection of the submenu for
equipment definition
T1.4 Thread monitor -
Selection of the submenu for thread
monitor options
T1.5 Condensed stitches -
Selection of the submenu for setting
of condensed stitches
T1.7 Times -
Selection of the submenu for
entering machine times
T1.8 Counter (totalizer) -
buttonholes ever sewn
0 … 99,999,999
Display of the counter of all
buttonholes ever sewn
The value cannot be selected or
edited.
7
3