Operation Manual

9. Sewing
Operating and function sequence when sewing:
Sewing procedure Operation/ Explanation
Before starting
sewing
Initial position - Pedal idle
Locking unit idle
Needle up, material clamps up.
Insert material
Sewing - Push pedal forward to position 1.
The clamps come down.
- Release pedal.
The clamps go up again.
The material can be repositioned.
- Push pedal completely forward.
The locking unit sews at the set
speed.
In the sewing cycle
Stop sewing
procedure- - Push pedal back.
The locking unit stops.
The clamps stay at the bottom.
To continue the
sewing procedure - Push the pedal all the way forward.
89
1