Operation Manual

Error Description Possible cause Troubleshooting
code
7551
-
7559
Operating panel
interface
communication
Internal error
- Switch the machine off and
on again
- Update software
- Contact DA Service
7556
7557
Operating panel
interface
communication
-Cablefault
- Operating panel interface
cable faulty
- Switch off source of interference
- Check cable
-
7700 Protocol: Max.
number of repeats
-Cablefault
- Test interface cable
faulty
- Switch off source of interference
- Check cable
-
7701 Error log Internal error
- Switch the machine off and
on again
- Update software
- Contact DA Service
8351
8700
8702
8800
-
8806
8890
8891
Test pin error/ key
simulation/ signal/
event processing/
memory wrapper/
function list
Internal error
- Switch the machine off and
on again
- Update software
- Contact DA Service
9100
-
9105
9200
9201
9900
9902
9903
9905
Sewing patter n
management error/
Sewing patter n
program/ Sewing
pattern activation/
Setting up/ Pressing
keys/ Memory
message output
Internal error
- Switch the machine off and
on again
- Update software
- Contact DA Service
If error 9110 occurs
repeatedly. Reset the sewing
pattern programs and sequences
using the Initialization menu
(see Page 60).
If an error occurs the corresponding unit can be checked to ensure it
is working properly using the Service/ Multi-test menu (see Page 49).
The Service menu can be accessed at technician level and when
switching the machine on by pressing F when the DA logo appears
(Enter code 25483).
88