Operation Manual

Error Description Possible cause Troubleshooting
code
4312 Unknown dongle type - Dongle not correctly
formatted
- Dongle faulty
- Format the dongle again
- Use another dongle
4530
-
4537
4900
Menu system error/
user error message
Internal error
- Switch machine off and on again
- Update software
- Inform DA service
5101 NV RAM empty Control unit is new. No data
available
Control unit for a different
machine class, data
incompatible
Data is reset to factory settings
5104 NV RAM checksum
error
NV SRAM faulty
Malfunction
- Check with Multi-test, check
control unit
- Switch the machine off and
on again
- Data is reset to factory settings
5804 Free contours:
Checksum incorrect
-NVSRAMfaulty
- Malfunction
- Check with Multi-test, check
control unit
- Switch machine off and on
again.
Data is reset to
factory settings
5808 Error - free seam
contour stitch number
cannot be determined
Internal error
- Switch the machine off and
on again
- Update software
- Contact DA Service
5809 Free contours:
Maximum number of
partial contours
Maximum number of partial
contours (interim cutting)
exceeded
Delete the interim cutting
operations in the free contours
5810 Free contours:
Minimum number of
stitches per partial
contour
Minimum number of stitches
per partial contour not adhered
to
Move interim cutting operations in
the free seam contours.
5900 Sequence error -
Impermissible
sequence number
Internal error
- Switch the machine off and on
again.
-Update software
- Contact DA Service
6152
-
6154
6204
Input/ output error Internal error
- Switch the machine off and
on again
- Update software
- Contact DA Service
6351
-
6354
Error I
2
C Control unit faulty Check control unit
6551
6554
6651
6751
-
6759
Upperpartposition
error/ AD converter/
processorerror/step
motor driv er
Internal error
- Switch the machine off and on
again.
-Update software
- Contact DA Service
7460 Test interface
communication
-Cablefault
- Test interface cable
faulty
- Internal error
- Switch off source of interference
- Check cable
- Switch the machine off and on
again
87
1