Operation Manual

Pictogram Description Category Reaction/ troubleshooting
Contour exceeds the
clamping foot material
support opening in the X
direction
Warning
· Sewing cannot start
· select another c lamping foot
. select another sewing pattern
. Reduce the sewing pattern in the X
direction.
Contour exceeds the
clamping foot material
support opening in the Y
direction
Warning
. Sewing cannot start
. select another clamping foot
. select another sewing pattern
. Reduce the sewing pattern in the Y
direction.
Contour exceeds the
clamping foot material
support opening in the X
and Y direction
Warning
. Sewing cannot start
. select another clamping foot
. select another sewing pattern
. Reduce the sewing pattern in the X
and Y direction
Sewing patter n blocked Note
. Sewing cannot start
. select another sewing pattern
. Activate sewing patter n
Excessive
thread tension
magnet temperature
Warning
· Flow adjuster (thread tension)
is switched off
Time expired without
operating input
· Clamping foot is lowered
84