Operation Manual

1
8.8.2 Application messages
Pictogram Description Category Reaction/ troubleshooting
Capacity counter is zero
Note
· Clamping foot can only be lowered
after pressing OK
.
· The message disappears when
it has been confirmed.
· When the message has been confirmed
the capacity counter is reset to its
initial value.
Hand wheel turned
manually
Warning
After the sewing procedure is interrupted:
· no further sewing is possible
· Cancel the sewing procedure by
moving the pedal backwards, confirm with
manual switch 1 (clamps) or
press ESC on the
control panel.
Contour exceeds the
internal clamping foot
frame in the -X or +X
direction.
Warning
· no further sewing is possible
. select another c lamping foot
· select another sewing pattern
· Reduce the X offset in the appropriate
direction
.
Contour exceeds the
internal clamping foot
frame in the -X or +X and
Y direction.
Warning
· no further sewing is possible
. select another c lamping foot
. select another sewing pattern
·
Reduce
the X offset in the appropriate direction.
Reduce the sewing patter n in the Y direction.
Contour exceeds the
internal clamping foot
frame in the -X and -Y and
+Y direction.
Warning
· no further sewing is possible
. select another c lamping foot
. select another sewing pattern
. Reduce X offset
·
Reduce the X offset in the appropriate direction.
Contour exceeds the
internal clamping foot
frame in the +X and -Y or
+Y direction.
Warning
· no further sewing is possible
. select another c lamping foot
. select another sewing pattern
. Reduce X offset
. Reduce
the Y offset in the appropriate direction.
Contour exceeds the
internal clamping foot
frame in the X and -Y or +Y
direction.
Warning
· no further sewing is possible
. select another c lamping foot
. select another sewing pattern
. Reduce the sewing pattern in the X direction
. Reduce
the Y offset in the appropriate direction.
Contour exceeds the
internal clamping foot
frame in the -Y or +Y
direction.
Warning
· no further sewing is possible
. select another c lamping foot
. select another sewing pattern
.Reduce
the Y offset in the appropriate direction.
83