Operation Manual

8.7 Distributor circuit board

The distributor circuit board is at the back of the machine under the

clamping foot magnet. All the inputs and outputs of the control unit

are accessible here. To get to the terminals you must remove the back

protective cover.

Description of the outputs

Output number Output assignment

Y1 (FW) 24V / 4 A Thread wiper magnet

Y2 24V / 0.5 A -

Y3 24V / 3 A -

Y4 (FS) 24V / 4 A* Thread tension magnet

Y5 24V / 0.5 A -

Y13 (FA) 24V / 3 A* thread cutter magnet

Y14 - Y17 24V / 0.5 A -

Y18 - Y19 24V / 6.5 A* -

Y21 - Y23 24V / 0.2A Option: Laser marking lights 1 - 3

Y24 - Y28 24V / 0.2A -

Y31(X11/ X12: FL) 60V / 8A(2A) Clamping foot magnet

*: Output is PWM-enabled

Magnets and magnetic valves are connected between +24V (X9) and

the corresponding output (X8, X10).