Operation Manual

Parameter sub menu
Selecting the sub menu to enter the contour parameters
Default speed:
Default speed
Enter: 100...2700 rpm
Distance X:
Distance from the hole in the X direction
Enter: 0 ...40.0 mm
Distance Y:
Distance from the hole in the Y direction
Enter: 0...20.0 mm
Default values = exter nal stitches in X and Y direction
Values must be changed depending on the distance between the
button and the hole (refers to correct scaling in the main menu).
If the free s eam contour is currently s elected in the main display and if
one or both of the X/Y distances have been changed, the value for the
length or width or both must be changed accordingly in the main
menu.
67
1
Std.dz.: 1500
Abst. X: 0.0
Abst. Y: 0.0