Operation Manual

Determining contour co-ordinates
When creating a seam contour each individual stitch with details of
the position on the co-ordinate c ross (S and Y axis) must be entered
into the control unit. The individual co-ordinate points must therefore
be determined in advance.
The co-ordinate points can be determined using millimeter paper.
Maximum sewing area stitch to be determined
(grey field)
seam contour recorded
Machine zero point
Co -o rd in a te c ro ss w i th
XandYaxis
Note
The seam contour should be created so that the machine zero point is
in the middle of the contour as far as possible.
–
Draw the maximum sewing field size on the millimeter paper (X =
max. 40 mm, Y = max. 20 mm).
–
Put the co-ordinate cross in the middle of the sewing area.
–
Plot the seam contour.
–
Determine the X and Y co-ordinates for each required stitch.
–
Enter the X and Y co-ordinates into the control unit (see next
page).
65
1