Operation Manual

Step motor test

The step motors and the associated reference switches can be

checked with this test function.

CAUTION Risk of breaking!

Move the needle upwards with the hand wheel before the test.

–

Start the test function by pressing OK.

–

Check the step motor for transverse movement (X axis).

Move the step motor by pressing “ï”or“ð”.

The number of steps moved is shown by the arrow on the left.

The status of the reference switch is modified by the reference

setting.

–

Check the step motor for lengthwise movement (Y axis).

Move the step motor by pressing “ñ”or“ò”.

The number of steps traveled is shown above the arrow.

The status of the reference switch is modified by the reference

setting.

–

Press ESC.

The test finishes.

The Multi-test menu appears on the display.

Schrittmotortest