Operation Manual

Manual switch operating mode (optional)
Selecting the manual switch mode.
This menu item is only available if the “manual switch” option is
activated in the Fittings menu.
Enter: A = Rapid start
B=Normal
In the “NORMAL” manual switch mode the switches have the
following functions:
Switch 1:Raising and lowering the clamping foot.
Stopping the sewing procedure.
Cancelling the sewing procedure when it has been stopped.
Switch 2:Start sewing when the clamping foot is lowered.
Stopping the sewing procedure.
Continuing the sewing procedure when it has been stopped.
In the “RAPID START” manual switch mode the switches have the
following functions:
Switch 1:Raising and lowering the clamping foot.
Stopping the sewing procedure.
Cancelling the sewing procedure when it has been stopped.
Switch 2:Start sewing.
If the clamping foot is not lowered it is lowered.
Stopping the sewing procedure.
Continuing the sewing procedure when it has been stopped.
Parameter blocking
Switching the ability of parameters to be changed on or off in sewing
and programming modes.
Enter: ON / OFF
Note
If the parameter block is switched on no parameter changes are
possible any more in sewing and programming modes.
49
1