Operation Manual

8.6.5 Technician mode
The following menus are included in technician mode:
Machine configuration
Machine-specific settings are configured in this menu.
User configurations
Operation-specific settings are configured in this menu.
Service functions
Service functions enable a rapid check of all hardware components.
Free contours
Up to nine freely defined seam contours can be created and sewn with
the button sewer 531. The co-ordinates are entered directly on the
control panel.
Memory dongle
Data can be transferred from the machine to the dongle or loaded
from there onto the machine using the memory dongle support.
Cycle time
Displays the cycle time of the last sewn sewing patter n.
(Time from start to end of sewing).
38