Operation Manual

Thread tension sub menu
Switch to this sub menu to set the thread tension.
The values displayed correspond to the thread tension in area 2
(overstitches).
Securing stitch sub menu
Switch to this sub menu to change the parameters for the securing
stitches. The current values are displayed (number/ distance between
the stitches).
Interloop stitch sub menu
Switch to this sub menu to change the parameters for the interloop
stitches. The current values are displayed (number/ distance between
the stitches).
Distance betw een button holes sub menu
Switch to this sub menu to set the distance between button holes in the
X and Y direction seePage25).
Display: current distance between button holes X/Y
Sew ing pattern offset sub menu
Switch to this sub menu to move the sewing pattern in the X and Y
direction (see Page 25).
Display: current X offset/ Y offset
Stitch distribution/ number of stitches
Displays the overstitch distribution (with standard sewing patterns) or
total number of stitches (with free contours).
Soft start
The soft start can be switched on or off with this parameter.
Enter: ON / OFF
Laser marking lights sub menu (optional)
This menu item is only displayed if the laser light option is switched on
in the Fittings menu.
Laser lights 1 ...3
Switching the laser marking lights 1 - 3 on or off
Enter: ON / OFF
30