Operation Manual

Sub-menu
There is a sub menu behind this symbol.
Number of stitches
With standard sewing patterns this menu line displays the overstitch
distribution with the standard sewing patterns and the total number of
stitches with the free contours (cannot be changed).
Selecting the line by pressing “OK” takes you to the “Special
functions” sub menu.
Daily unit counter or capacity counter sub menu.
Selecting the line by pressing “OK” takes you to the “Daily piece
counter or the capacity counter” sub menu.
Resetting the daily piece counter
–
Press “ñ”or“ò”toswitchtothe menuitem.
–
Hold “OK” down for 3 seconds until the number displayed goes
back to 0.
The daily piece counter can also be reset in this w ay if the capacity
level is displayed. However, the value does not go back to 0.
or
Capacity counter
Selecting the line by pressing “OK” takes you to the “Daily piece
counter or the capacity counter” sub menu.
Special function and soft start status sub menu
Thread winding mode
The hook thread winder can be operated separately.
The sewing motor can be started with the pedal or manual switch
regardless of the step motors if ON is set.
Enter: ON / OFF
26
: Aus
: Ein