Operation Manual

Overstitch thread tension (see Table 1)

The thread tension for overstitches is set with this menu item.

Enter: 0 … 100 0 = lowest thread tension

100 = highest thread tension

The thread tension magnet sets the thread tension in accordance with

the current value so t hat this can be checked.

If the fixing stitches are active (only with sewing patter n programs),

the thread tension values in all other areas (see Table 1) of the sewing

pattern is changed too depending on t he difference from the previous

value.

With standard sewing patterns (1 - 50) the thread tension in the

different areas is not set separately. If this is necessary a s ewing

pattern program must be created.

Sewing patter n size/ s ewing pattern offset sub menu

Switch to this sub menu to set the sewing patter n size of the s ewing

pattern offset. The current sewing pattern size is shown in the X and Y

direction.

Sewing patter n width

Setting the sewing patter n width

Enter: 0.1 … 40 mm

Sewing patter n length

Setting the sewing patter n length

Enter: 0.1 … 20 mm

Sewing patter n offset in X direction

To set the sewing pattern offset in the X direction

Enter: -20.0 … +20.0 mm

Sewing patter n offset in Y direction

To set the sewing pattern offset in the Y direction

Enter: -10.0 … +10.0 mm

: 3.4

: 0.0