Operation Manual

8.6 Main menu
8.6.1 Sewing pattern mode
The parameters for the individual sewing patter ns are arranged in the
main menu.
The sewing patterns can be changed with these parameters.
–
Switch the main switch on.
The control unit is initialized.
The main menu appears.
–
Select the required parameters by pressing “ñ”or“ò”.
The symbol for the selected parameters is shown inversely.
–
Change the selected parameters as described in Section 8.3.
Menu item
The symbol at the top left of the screen describes the currently
selected menu item.
Button image
The symbol at the bottom left of the screen shows the current button
pattern.
Sewing patter n
The sewing pattern to be sewn is selected with these parameters.
Selection:1..51(52-99ifavailable)
Speed
The required speed is set with these parameters.
Enter: 0 - 2700 rpm
24
:1
: 2000
:35
: 3.4/ 3.4
/ :6-6
/Ó: 0