Operation Manual

8.2 User interface
8.2.1 Menu structure
Tur n the main switch
on
F button
Service
menu
Codes 1
Sewing mode
ESC key F key
P button Codes 1
Button
ESC
Programming mode Technician mode
S button
S button
P button
Sequence programming mode
Calling up the service menu
–
Press F and hold it down.
–
Tur n the main switch on.
The control unit is initialized.
After a short time the window to enter the number code appears.
–
Enter the number code (Code 1 see Section 8.6.4).
The display changes t o the service menu (see Section 8.6.4.3).
20