Operation Manual

7.10 Adjusting the button clamp hook feet

Caution, danger of injury!

Take great care when adjusting the button clamp when the button

sewer is switched on.

The button should be pushed as lightly as possible between the hook

feet on the button clamp and can be aligned.

But the button must be securely clamped so that it cannot tur n when

it is inserted into the material.

Stop 4 adjusts the amount the hook feet open.

–

Switch the button sewer on.

The button clamp lifts up.

–

Put the button to be sewn on between hook feet 1 and 2.

–

Undo knurled nut 3.

–

Move the stop towards the screw 5.

–

Tighten knurled nut 3.

–

Check whether the button can be inserted easily and aligned.

543