Operation Manual

7.5 Winding hook threads

–

Put the bobbin on the bobbin winder 4.

–

Pull the thread through the guide 2 and round the tensioner 1 .

–

Wind the thread anti-clockwise about 5 times round the coil

bobbin.

–

Push the bobbin lever 3 onto the bobbin.

–

Sew

The bobbin lever ends the procedure as soon as the bobbin is full.

–

After winding break the thread on the thread clamp 5.

Note!

Should the thread be wound without sewing

the thread winding mode can be switched to in the “Special functions”

sub menu.

When the thread winding mode is switched on the sewing motor can

be started with the pedal or the manual switch regardless of the

sewing area drive (here unthread threads on the thread lever).

For settings see Section 8.5.1 “Thread winding mode”.

: 2000

:35

: 3.4/ 3.4

/ :6-6

/Ó: 0

: Aus

: Ein