Service manual
Appendix
64 Service manual 512/532 Version 00.0 - 12/2013
E 5 0 7 Read error own
sewing patterns
U01 ~ U10 read error • Download the data again.
E 5 0 8 File error own
sewing patterns
U01 ~ U10 read error • Check file type.
E 5 0 9 File error own
sewing patterns
U01 ~ U10 read error • Check file type.
E 5 1 0 File error own
sewing patterns
U01 ~ U10 read error • Check file type.
• Save data to USB again.
E 5 1 1 USB write error File with the same name
already exists
• Delete or rename file.
E 5 1 2 USB read error Data cannot be loaded
from USB stick
• Check USB stick.
• Reinsert USB stick.
E 5 1 3 USB write error Data cannot be copied to
USB stick.
• Check USB stick.
• Reinsert USB stick.
E 5 5 0 Data write error Flash memory transfer
error
• Set main switch to OFF.
• Repeat process.
• Replace the mainboard.
E 5 5 1 Internal process
error
Softwar error • Set main switch to OFF.
• Repeat process.
• Replace the mainboard.
• Update software.
E7
7
0
3
7
5
Motor signal error Encoder / motor has no
signal
• Check motor / encoder.
E 7 3 6 Motor rotation error Motor stops / encoder has
no signal
• Check motor / encoder.
E 7 3 7 Error Z phase Z signal no longer changes • Check motor / encoder.
E 7 3 8 Error Z phase Z signal inaccurate /
encoder has no signal
• Check motor / encoder.
E 9 0 7 Error search X-axis X-axis sensor does not
respond
• Set main switch to OFF.
• Check sensor.
E 9 0 8 Error search Y-axis Y-axis sensor does not
respond
• Set main switch to OFF.
• Check sensor.
E 9 1 0 Error clamp foot
search
Clamp foot sensor does not
respond
• Set main switch to OFF.
• Check sensor.
E 9 1 1 Error clamp foot
motor
Clamp foot motor does not
operate corrrectly
• Set main switch to OFF.
• Check motor and connection.
E 9 1 2 Internal error - • Notify DA Service
E 9 1 3 Error thread catcher
search
Thread catcher sensor
does not respond
• Set main switch to OFF.
• Check sensor.
E 9 1 4 Error thread catcher
motor
Thread catcher motor does
not operate corrrectly
• Set main switch to OFF.
• Check motor and connection.
Error Meaning Possible cause
Remedial measures
Process in the order specified!