Service manual

Settings via software
40 Service manual 512/532 Version 00.0 - 12/2013
11.14Storing sewing patterns
Standard sewing patterns can be stored on the sewing pattern memory
buttons P1 to P5; 50 memory slots are available for this.
The memory slots are accessed using the +/- Function buttons; memory
slots up to 25 can also be accessed using the sewing pattern memory
buttons and combinations thereof.
Shortcuts for sewing pattern memory buttons
11.14.1Mapping memory buttons
Prerequisite:
• The machine is in the programming mode, the LED in the Ready button
is off.
1. Press the Memory and P2 buttons simultaneously.
2. Press the +/- Program buttons to select a memory slot.
3. Press the Ready button to confirm the memory slot.
4. Select the sewing pattern ( 11.4 Selecting a sewing pattern, page 35).
5. Scale the axes ( 11.5 Scaling axes, page 35).
6. Set the speed ( 11.6 Setting the speed, page 37).
7. Moving the position of the sewing pattern:
• Press the Selection button until the X-axis LED flashes.
• Press the +/- Function button and set the values: -5/+5.
• Press the Selection button until the Y-axis LED flashes.
• Press the +/- Function button and set the values: -4 /+4.
8. Press the Ready button to confirm the settings.
9. Press the Memory button to quit the memory mode.
10.Check the sewing pattern
( 11.7 Checking the sewing pattern, page 37).
Memory
slot no. Shortcut
Memory
slot no. Shortcut
Memory
slot no.
Shortcut
Memory
slot no.
Shortcut
P1 P1 P8 P1 + P4 P15 P4 + P5 P22 P2 + P3 + P4
P2 P2 P9 P1 + P5 P16 P1 + P2 + P3 P23 P2 + P3 + P5
P3 P3 P10 P2 + P3 P17 P1 + P2 + P4 P24 P2 + P4 + P5
P4 P4 P11 P2 + P4 P18 P1 + P2 + P5 P25 P3 + P4 + P5
P5 P5 P12 P2 + P5 P19 P1 + P3 + P4
P6 P1 + P2 P13 P3 + P4 P20 P1 + P3 + P5
P7 P1 + P3 P14 P3 + P5 P21 P1 + P4 + P5