Service manual

Settings via software
38 Service manual 512/532 Version 00.0 - 12/2013
11.9 Winding
Prerequisite:
• Needle removed.
• Needle thread not threaded.
1. Press the Ready button.
 The LED in the button illuminates.
2. Press the Ready button.
 The LED in the button switches off.
3. Press the Selection button until the Wind LED illuminates.
4. Press the Ready button.
 The LED in the button illuminates, the clamp is lowered.
5. Press the pedal forwards.
 Winding starts.
6. To stop winding, briefly press the pedal completely forwards.
7. Press the Ready button.
 The LED in the button switches off, the clamp is raised.
11.10Sewing
Prerequisite:
• The machine is in the sewing mode, the LED in the Ready button is
illuminated.
• Needle fitted.
• Needle thread threaded.
• Sewing pattern selected.
1. Insert the material.
2. Press the foot pedal forwards to the first position.
 The clamp is lowered.
If the pedal is released, the clamp is raised.
3. Briefly press the foot pedal completely forwards.
 The sewing process starts. At the end of sewing the clamp is
automatically raised.