Service manual

Work principles
Service manual 512/532 Version 00.0 - 12/2013 15
3.3.8 Removing and inserting the throat plate
Figure 8: Removing and inserting the throat plate I
Removing the throat plate
1. Remove both springs of the fabric clamp (1).
2. Raise both clamp feet (2).
3. Loosen the screw (3) for the work surface (4).
4. Remove the work surface (4).
Figure 9: Removing and inserting the throat plate II
(1) - Springs of the fabric clamp
(2) - Clamp feet
(3) - Screw
(4) - Work surface
①
②
③
④
(5) - Thread puller blade connecting rod (6) - Screw
⑥
⑤