Operating instructions

10.2 Oil lubrication

Caution – Risk of Injury !

Oil can cause skin rashes.

Avoid prolonged skin contact.

If oil or grease contacts your skin, wash yourself thoroughly.

CAUTION !

The handling and disposal of mineral oils is subject to legal

constraints.

Deliver used oil to an authorized reception point.

Protect your environment.

Take care not to spill any oil.

Oil the automatic bartacker exclusively with the lubricating oil DA-10 or

equivalent oil with the following specification:

Viscosity at 40° C: 10 mm²/s

Flash point: 150° C

DA-10 can be purchased at sales branches of

DÜRKOPP ADLER AG, under the following part numbers:

250-ml container: 9047 000011

1-litre container: 9047 000012

2-litre container: 9047 000013

5-litre container: 9047 000014

Maintenance required Explanation Operational interval, hours

Lubricating the automatic

bartacker

The automatic bartacker is equipped with

central oil wick lubrication. The bearings are

supplied by the oil reservoirs 2 and 3.

- The oil level must not drop below the r ed

marking of both reservoirs.

- Fill up oil though the drill-hole 1, u p to the

red mark.