Operating instructions

Error code Description Possible cause Remedy
7551
-
7559
Communication
control panel interface
Internal error
- Switch machine off and on again
- Software update
- Inform DA Service
7556
7557
Communication
control panel interface
- Line interference
- Cable to control panel
interface is defective
- Switch off source of interference
- Check the cable
7700 Protocol:
Max. number of
repetitions
- Line interference
- Cable to test interface is
defective
- Switch off source of interference
- Check the cable
7701 Protocol error Internal error
- Switch machine off and on again
- Software update
- Inform DA Service
8151
8700
8702
8800
–
8806
8890
8891
Test pin error /
Key simulation /
Signal / Event
processing / Memory
wrapper /
List functions
Internal error
- Switch machine off and on again
- Software update
- Inform DA Service
9100
–
9105
9200
9201
9900
9902
9903
9905
Seam pattern admin.
error /
Seam pattern program
/ Seam pattern
authorization /
Equipment /
Key processing /
Memory event version
Internal error
- Switch machine off and on again
- Software update
- Inform DA Service.
If error 9100 occurs repeatedly,
reset the seam pattern program
and sequences with the
Initialization menu
(refer to page 60).
If an error occurs, the corresponding component can be tested for
proper functioning via the Service/Multitest function (compare to
page 49). The Service menu can be reached from the Technician level.
It can also be reached by pressing the F key when the DA logo
appears turning machine boot-up. (entry code: 25483).
86