Operating instructions

Error code Description Possible cause Remedy
4312 Unknown dongle type - Dongle has been
incorrectly formatted
- Dongle faulty
- Reformat dongle
- Use a different dongle
4530
-
4537
4900
Menu system / user
message error
Internal error
Turn machine off and then on again.
Software update.
Inform DA service
5101 NV-RAM empty Control unit is new, no
data available.
Control unit is from
another machine class,
data is not compatible
Data res et to factory settings
5104 NV-RAM checksum
error
- NV-SRAM faulty
- Malfunction
- Check with Multitest.
Check control unit
- Turn machine off and on again.
Data res et to factory settings
5804 Free contours:
Checksum incorrect
- NV-SRAM faulty
- Malfunction
- Check with Multitest
- Check control unit
- Switch machine off and on again.
Data res et to factory settings
5808 Error: free seam
contour,
stitch number cannot
be determined
Internal error
- Switch machine off and on again
- Software update
- Inform DA Service
5809 Free contours:
Max. number of partial
contours
Max. number of partial
contours (intermediate
cuttings) exceeded
Delete the intermediate cutting
operations in the free contours
5810 Free contours:
Min. number of
stitches per partial
contour
Min. number of stitches
per partial contour not
present
Change the intermediate cutting
operations in the free contours
5900 Sequences error –
Invalid sequence
number
Internal error
- Switch machine off and on again
- Software update
- Inform DA Service
6152
-
6154
6204
Input/output error Internal error
- Switch machine off and on again
- Software update
- Inform DA Service
6351
-
6354
I
2
C error
Control unit faulty Check the control unit
6551
6554
6651
6751
-
6759
Upper position error /
AD converter /
Processor error / Step
motor driver
Internal error
- Switch machine off and on again
- Software update
- Inform DA Service
7460 Communication test
interface
- Line interference
- Cable to test interface is
faulty
- Internal error
- Switch off source of interference
- Check the cable
- Switch machine off and on again.
85
1