Operating instructions

8.8.2 Application messages
Icon Description Category Action
Capacity counter is zero Note
• The clamping foot can be lowered only
after pressing the “OK” key.
• The message disappears after the key
is pressed.
• After pressing the key, the capacity
counter is reset to its starting value.
Handwheel turned
manually
Caution
After aborting the sewing process:
• No further sewing is possible
• Abort the sewing process by pressing
back on the pedal.
• Confirm with hand switch 1 (clamps) or
with the “ESC” key on the control panel.
The contour overlaps the
clamping-foot
inner frame in the X or Y
direction.
Caution
• No sewing start is possible
• Select another clamping foot
• Select another seam pattern
• Decrease the X offset in the
appropriate direction
The contour overlaps the
clamping-foot inner frame
inthe–Xor+Xand+Y
direction.
Caution
• No sewing start is possible
• Select another clamping foot
• Select another seam pattern
• Decrease the X offset in the
appropriate direction
• Decrease the seam pattern in the
Y direction
The contour overlaps the
clamping-foot inner frame
inthe–Xor+Xand+Y
direction.
Caution
• No sewing start is possible
• Select another clamping foot
• Select another seam pattern
• Decrease the X offset
• Decrease the Y offset in the
appropriate direction
The contour overlaps the
clamping-foot inner frame
in the +X and –Yor+Y
direction.
Caution • No sewing start is possible
• Select another clamping foot
• Select another seam pattern
• Decrease the X offset
• Decrease the Y offset in the
appropriate direction
The contour overlaps the
clamping-foot inner frame
in the X and –Yor+Y
direction.
Caution
• No sewing start is possible
• Select another clamping foot
• Select another seam pattern
• Decrease the seam pattern in the
X direction
• Decrease the Y offset in the
appropriate direction
The contour overlaps the
clamping-foot inner frame
in the –Y or +Y direction.
Caution
• No sewing start is possible
• Select another clamping foot
• Select another seam pattern
• Decrease the Y offset in the
appropriate direction
Time expired without
operator input
• The clamping foot is lowered
1
81