Operating instructions

8.7 Distributor PCB

The distributor PCB is located at the back of the machine below the

clamping foot magnet. All control unit inputs and outputs are

accessible from here. The rear cover must be removed in order to gain

access to the terminals.

Description of the outputs

Output number Output Assignment

Y1 (FW/FK) 24V / 4 A Thread clamp magnet / optional: Thread wiper

magnet

Y2 24V / 0.5 A -

Y3 24V / 3 A -

Y4 (FS) 24V / 4 A* Thread tension magnet

Y5 24V / 0.5 A Optional: Magnetic valve for the “separated

clamping foot 1"

Y6 24V / 0.5 A Optional: Magnetic valve for the “separated

clamping foot 2"

Y7 - Y12 24V / 0.5 A -

Y13 (FA) 24V / 3 A* Thread trimmer magnet

Y14 - Y17 24V / 0.5 A -

Y18 - Y19 24V / 6.5 A* -

Y21 - Y23 24V / 0.2A Optional: Laser marking light 1 – 3

Y24 - Y28 24V / 0.2A -

Y31(X11/ X12: FL) 60V / 8A(2A) Clamping foot magnet

*: Output is PWM-compatible

Magnets and magnetic valves are connected between +24V (X9) and

the corresponding output (X8, X10).