Operating instructions

Maximum sewing area Stitch to be determined

(grey field)

Sketched seam contour

Machine zero point

Coordinate system with

X- and Y-axis

Note

The seam contour should be laid out in such a way that the machine

neutral point is as close to the middle of the contour as possible.

–

Sketch the maximum sewing field size on the millimetre-scaled

graph paper (X = max. 40 mm, Y = max. 20 mm).

–

Draw the coordinate system in the centre of the sewing field.

–

Draw in seam contour.

–

Determine the X- and Y-coordinates for every desired stitch.

–

Enter X- and Y-coordinates in the control unit (refer to next page).