Operating instructions

8.6.4.4 Free contours

With the automatic bartacker 510, up to nine freely-defined seam

contours can be created and sewn. The entry of the coordinates is

carried out at the control panel.

Creating

Using this menu item, a new seam contour can be created.

Note

The number of the seam contour is assigned automatically.

Altering

After s election of the s eam contour to be altered, the sub-menu for

altering the seam contour will appear.

Delete

Using this menu item, a selected seam contour can be deleted.

Copy

Any basic seam pattern number or free seam contour can be copied

and altered. After selection of the seam pattern number, the sub-menu

“Alter seam contour” appears.

Select the desired function with the “ñ” and “ò”keys.

Choose the selected function with the “ OK” key.

Note

The number of the seam contour is assigned automatically.

Number of available stitches:

The number of the stitches still available is displayed (max. 5000)

Number of available seam patterns:

The number of the seam patterns still available is displayed (max. 9)

Determining the seam pattern coordinates

When creating a seam contour, every individual stitch has to be

entered in the control unit along with its position in the coordinate

system (X- and Y-axis). Therefore the individual coordinate points have

to be pre-determined.

This can be done with the help of millimetre-scaled graph paper.

Design

Edit: 0

Delete: 0

Copy

No.pat.av.: 8

No.st.av.:4900