Operating instructions

Auto-Input test
With this testing function, the functioning of the input elements is
checked.
CAUTION !
The input elements have been carefully adjusted in the factory.
Adjusting and correcting should only be carried out by trained service
staff.
Caution – Risk of Injury !
Do not reach into the working area of the machine when starting and
ending the input tests.
–
Start testing function by pressing the “OK” key.
–
Press desired input element.
The switch status and the number of the actuated input element
are displayed.
–
Press the function key “ESC” in order to leave the testing function.
The Multitest menu is displayed.
The current configuration of the inputs is indicated in the table under
“Input test”.
54
== Auto input tst ===