Operating instructions

PWM output test

This testing function checks the function of the magnets.

–

Start test function with the “OK” key.

–

Select the desired output element by pressing the “ñ”or“ò”keys.

–

Switch the selected output element on and off by pressing the “OK”

key.

–

The present electricity, flowing through the clamping foot solenoid

will be displayed.

–

If the machine is equipped with a monitoring switch for the

clamping foot, the Output PWM-1 will have the value + or -,

according to the switching status of the output element.

–

Press the function key “ESC” in order to leave the testing function.

Caution – Risk of Injury !

Do not reach into the running machine during the functional test of the

output elements.

Output element Function

Y31 Clamping foot magnet

Also refer to the “Distributor PCB ” section

== PWM output test ==

Output Y31: 0