Operating instructions

Output test

With this testing function, the function of the output elements is

checked.

–

Start testing function with the “OK” key.

–

Select the desired output element by pressing the “ñ”or“ò”keys.

–

Switch the selected output element on and off by pressing the “OK”

key.

–

Press the function key “ESC” in order to leave the testing function.

Caution – Risk of Injury !

Do not reach into the running machine during the function test of the

output elements.

Output-

element Function

Y1 Thread clamp/thread wiper (option)

Y2 Magnetic valve for the pneumatic sewing foot lift

Y4 Thread tension

Y13 Thread trimmer magnet

Y18 Separated clamping foot 1, if the option is activated

Y19 Separated clamping foot 2, if the option is activated

Y21 Laser marking light 1, if the option is activated

Y22 Laser marking light 2, if the option is activated

Y23 Laser marking light 3, if the option is a ctivated

Also refer to the “Distributor PCB ” section

The current configuration of the outputs is indicated in the sub-menu

“Output assignments” in the “Configuration” menu.

==== Output test ====

Output Y1: +