Operating instructions
Clamping foot Max. Size X x Y Inner frame Description
number Tack size [mm] Rectangular
(X,Y) [mm] Inner frame
1 19.0 x 3.5 20.0 x 4.5 yes Cross tack
2 20.0 x 4.1 21.0 x 5.1 yes Cross tack
3 26.0 x 4.0 27.0 x 5.0 yes Large cross tack
4 9.0 x 3.5 10.0 x 4.5 yes Small cross tack
5 4.6 x 20.0 5.6 x 23.0 yes Longitudinal tack
6 18.0 x 11.0 19.0 x 12.0 yes Small-field clamping foot
7 40.0 x 20.0 44.0 x 24.0 yes Large-field clamping foot
8 8.5 x 3.6 9.5 x 4.5 yes Contraction clamp
9 14.0 x 14.0 16.0 x 16.0 no Circle
10 11.0 x 8.0 12.0 x 14.0 no D-clamping foot, simple
11 8.6 x 11.6 24.6 x 12.6 no Double-D clamping foot, lateral
1 2 11. 6 x 7. 5 1 2.6 x 21.0 no Double-D clamping foot, longitudinal
13 12.9 x 11.2 34.8 x 12.2 no Double-tri clamping foot, lateral
14 16.0 x 2.6 17.0 x 3.6 yes “Belt looph
16 8.6 x 13.6 24.0 x 14.6 no Double-D clamping foot, lateral
Length
Input of a freely selectable s ewing field.
Input only possible when “free clamp dimension”
has been selected. Otherwise the length / width of
the selected clamp is indicated (and cannot be modified).
Input: 0.5 – 20.0
Width
Input of a freely selectable s ewing field.
Input only possible when “free clamp dimension”
has been selected. Otherwise the length / width of
the selected clamp is indicated (and cannot be modified).
Input: 0.5 – 40.0
Configuration
The optional units can be activated in this sub-menu.
Caution – Fragile, danger of breakage!
When manufacturing the clamps for open dimensions, a safety margin
must be taken into account.
1
41