Operating instructions

8.6.2 Programming mode

Under this menu item, the parameters for programming of seam

patterns are arranged.

With the help of these parameters, the shape, length, width and speed

of the seam pattern are specified.

–

Turn on the main switch.

The control unit is initialized.

The main menu appears.

–

Press function key “P” on the main menu.

The display changes over to the menu of the programming mode.

–

Select the desired parameter with the “ñ” and “ò”keys.The

symbol of the selected parameter is displayed white on black.

–

Alter the selected parameter as described in chapter 8.3.

Number of seam pattern

The number of the seam pattern to be created or altered is selected

using this parameter.

When preparing a new program, an asterisk (*) is indicated before the

number.

Input: 51 90

–

Select the desired seam pattern program with the “ñ” and “ò”

keys.

–

Press the “OK” key.

The program is activated.

Basic seam pattern

Using this parameter, a standard seam pattern can be selected on the

basis of which the new seam pattern is to be created.

Input: 1 50 or

91 99 if available

Sew ing speed

Using this parameter, the desired sewing speed can be adjusted.

Input: 0 – 2700 [rpm]

:51

: 2700

:25

: 16.0/ 2.0

: 0.0/ 0.0

:42

:On