Operating instructions

7.5 Winding the bobbin thread

–

Put bobbin on bobbin winder 4.

–

Pull thread through guide 2 and around tension 1.

–

Wind thread counter-clockwise around the core of the bobbin

(approx. 5 times).

–

Press the bobbin-winder lever 3 in the bobbin.

–

Sew.

The winder lever stops as soon as the bobbin is full.

–

Tear off thread at thread clamp 5 after winding up is finished.

Note!

If the thread is to be wound on without sewing, the thread winding

mode can be altered in sub-menu “Special functions”.

If the thread winding mode is active, the sewing motor can be started

via pedal or push button independent of the s ewing field drive

(unthread at the thread lever).

For adjustment, see chapter 8.5.1 “Thread winding mode”.

: Off

:On

: ...