Operating instructions

5
2
3. Mount stand and control circuitry cabinet
3.1 Table tops
The cutouts of self-manufactured table tops must have the dimensions
indicated in the sketch.
Caution – Risk of Injury !
The table tops must have the required load-carrying capacity and
strength.
3.2 Frame parts assembly
–
Mount the individual parts of the stand as shown in the illustration.
–
Set the adjusting screw 3 to ensure the stability of the stand.
The frame must be resting with all four feet on the floor.
–
Screw pedal 2 on the stand strut 1.
–
Align pedal laterally (side-to-side).
Shift the pedal sideways so that it is positioned centrally to the oil
pan.
The stand strut is provided with slotted holes for aligning the pedal.
3
2
1