Operating instructions

6. Change sewing feet and fabric support plate

The automatic bartacker 511 is delivered with standard sewing

equipment.

If you have received further optional sewing equipment, this has to be

mounted as follows:

Caution – Risk of Injury !

Turnthemainswitchoff.

Change sewing equipment only when main switch is switched off.

Disassemble sew ing equipment

–

Unscrew screw 3.

–

Pull off holder 5.

–

Take out sewing feet 4 and 6.

–

Unscrew screw 1.

–

Take off support plate 2.

Assemble sew ing equipment

–

Insert sewing feet 4 and 6.

–

Place retainer plate 5 and screw tight with screws 3.

–

Place support plate 2 and screw tight with screw 1.

ATTENTION: Danger of breakage !

When changing the clamping foot, be sure to enter the new clamping

foot number in the menu “Equipment”.

36543