Operation Manual

sewing process operation / explanation
In mid-seam
Interrupt sewing process
Sew the corner
Continue sewing process
(after releasing the pedal)
Sew intermediate bar tack
- Release pedal (rest position).
The machine halts in the 1st position
(needle down).
The sewing feet are down.
- Release pedal.
The machine halts in the 1st position
(needle down).
-Operate knee lever.
The sewing feet rise.
- Rotate the material round the needle.
- Release knee lever.
The sewing feet are lowered onto the material.
- Push the pedal forwards.
The machine sews at the speed determined by
the pedal.
- Press stitch-regulating lever 1 downwards.
The machine sews backwards for as long as the
stitch-regulating lever is held down.
Speed is determined by the pedal.
At the end of the seam
Sew ending bar tack.
Remove material
- Press stitch-regulating lever 1 downwards.
The machine sews backwards for as long as the
stitch-regulating lever is held down.
Speed is determined by the pedal.
- Push the pedal backwards.
The thread is severed.
The machine halts in the 2nd position.
The sewing feet are down.
-Operate knee lever.
The sewing feet rise.
- Remove sewing material.
1
22