Operation Manual

5.11 Adjusting the sewing-foot pressure
The required sewing-foot pressure is set with knob 1.
–
To increase sewing-foot pressure = turn knob 1 clockwise
To decrease sewing-foot pressure = turn knob 1 anti-clockwise
5.12 Adjusting the stitch length
–
Set the required stitch length with knob 2.
To increase stitch length = turn knob 2 clockwise
To decrease stitch length= turn knob 2 anti-clockwise
–
To sew bar tacks manually press stitch-regulating lever 3 downwards.
The machine sews backwards for as long as stitch-regulating lever 3 is held down.
The stitch length is the same as that set for forwards sewing.
See also chapter 7.
1 2 3
16