Operation Manual

2
3. Machine sub-classes and sewing categories
3.1 Sub-class
Table 1
* only for Czech republic
3.2 Sewing categories
This code indication includes the equipment assembled on the machine head, both necessary equipment and optional equip-
ment. The standard configuration of the equipment has been preset, according to the under mentioned table, in the factory which
includes only necessary equipment. If the buyer demands a different configuration then the factory allocates a new code
indication.
Table 2
Standard configuration - the numbers in brackets stand for ordering Nos. when ordering separately the Equipment in question
4. Survey of equipment
This survey does not include the equipment assembled on the stand.
4.1 Equipment (at least one of each from the following group of equipment is assembled)
4.1.1 Needles
M 132 - needle 134 KKLR size 80
M 133 - needle 134 KKLR size 90
M 134 - needle 134 KKLR size 130
M 135 - needle 134 KKLR size 160
4.1.2 Wheel feeders
M 060 - wheel feeder with pitch of teeth 0.4 mm
M 059 - wheel feeder with pitch of teeth 0.6 mm
M 058 - wheel feeder with pitch of teeth 1.2 mm
•
•
•
•
•
•
•
•
•
•
Type of Top roller lift Reverse stitching Thread
the machine trimmer
Class-subclass Via knee Treadle Via electro- Via electro- Via hand Via electro-
-sewing lever mag. + mag. + lever mag. +
category knee lever treadle hand lever
4280i-611-XXX
4280i-621-XXX*
4280i-647-XXX
4280i-657-XXX*
4280i-6XX-100
1,2 80 35 0,4 1,2
(M 094) (S548 000255) (M 173) (M 060) (M 111)
4280i-6XX-200
1,6 90 35 0,4 1,5
(M 071) (S548 000260) (M 173) (M 060) (M 030)
4280i-6XX-300
2,0 130 35 0,6 2,0
(M 072) (S548 000312) (M 173) (M 059) (M 115)
4280i-6XX-400
2,4 160 35 1,2 2,4
(M 073) (S548 000325) (M 173) (M 058) (M 118)
Type Needle distance Needle size Top roller Wheel feeder Throat plate
insert
Class-sub-class Throat plate Diameter Pitch of teeth Width of hole
-sewing category mm 0.01mm mm mm mm
.