Operation Manual

Set-up
Operating manual 275 Version 01.0 - 01/2016 81
Continue switching the sewing sequence vie thread cutting
When sewing multiple widths in a program the next sequence is
usually activated by cutting the thread. 3 methods of switching the
next sequence via thread cutting are available:
1. After calling up the special functions ( page 79), press
sequence key 5.
The display (3) shows the A5 selection:
2. Select the desired setting using the Plus/Minus keys (4):
• Thread cutting does not switch to the next sequence:
Set the display to 00.
• Thread cutting does switches to the next sequence:
Set the display to 01.
• Switch to the next sequences after every thread
cutting operation and after 2 thread cutting operations
when automatic direction changing is setin the 1st and
the last sequence (the 1st thread cutting operation triggers
the direction change, the 2nd thread cutting operation
activates the next sequence): Set the display to 02.
The machine is set to 02 when delivered
3. Save the desired Setting by pressing the F (6) key twice.
The LED above the key goes out.
The system switches out of the special function mode
back into normal operation.