Operation Manual

Set-up
Operating manual 275 Version 01.0 - 01/2016 79
6.14Setting the DAC mini multiple width
controller
Figure 48: DAC mini control panel
Checking the basic settings of the controller
After setting up the machine the basic settings of the controller
must be checked and adjusted if necessary.
Calling up the special functions
1. Hold key F (6) pressed and switch on the machine at the main
switch.
The green LED above the F (6) key lights up.
2. Release the F (6) key.
The green LED above the F (6) key flashes.
After the internal system test has completed, the
display (3) shows the Special functions selection:
The various special functions are called up by pressing the
sequence keys (2) with the numbers 1 to 7. The green LEDs above
the keys indicate the respective function that has been called up.
The following sections describes the special functions of keys 2,
4 and 5. The other special functions are described in the  Service
manual.
①
(1) - Key for smooth sewing
(2) - Sequence keys
(3) - Display
(4) - Plus/Minus keys
(5) - (De-) Activation key
(6) - F key
(7) - Direction-change key
②④⑤③⑥⑦