Operation Manual

Set-up
Operating manual 275 Version 01.0 - 01/2016 75
6.11 Installing the knee switch
The knee switch is screwed under the table plate. Different
positions are used for machines without a DAC mini and machines
with a DAC mini.
Figure 45: Position of the knee switch: Machines without a DAC mini
Figure 46: Position of the knee switch: Machines with DAC mini
1. Screw the knee switch (1) under the table plate in the correct
position for the respective machine.
(1) - Knee switch
①
①
(1) - Knee switch